Fascia repair and replacement across Guelph
D&D Exterior Finishing handles fascia installation and fascia repair in Guelph, including Downtown Guelph, Old University, Exhibition Park, Kortright Hills, Westminster Woods and South End. We replace rotted boards, wrap sound wood in aluminum, and fit new fascia along the full roofline. The free written estimate lists scope, materials and colours.
Guelph is the Royal City, laid out in 1827 by John Galt on a radial street plan with squares, broad main streets and narrow side streets. Cut limestone shaped its early buildings, from the Old City Hall of 1856 to the Goldie Mill. With stone walls below, the roof edge is where colour and trim show most.
Fascia work in a limestone and brick city
Stone walls, visible roof edges
On stone and brick houses the fascia is one of the few places where colour changes, so it frames the whole house. We replace rotted lengths, wrap sound ones in custom-bent aluminum, and choose a colour that sits well with the stone, windows and eavestrough.
Narrow lots and close neighbours
The older blocks come in many shapes and sizes, with narrow side yards and corner lots. Where ladders and materials can go is decided at the visit. We note shared fences and gardens and plan the work around them.
Builder-grade trim on newer builds
On newer builds in any part of the city, original vinyl and thin aluminum fascia can fade, warp or dent. Swapping single lengths works if the colour still matches. When it does not, a full run of pre-formed aluminum gives one clean line, with soffit and eavestrough matched.
Gaps that let animals into the attic
Squirrels, raccoons, birds and wasps use loose fascia and damaged soffit to reach the attic. We replace the damaged board, close open joints and check the soffit nearby. Vented panels stay vented, with baffles where insulation presses close.
What to prepare for a Guelph fascia estimate
Look for dark stains, peeling paint, gaps and sagging runs on every side. Photograph them for your own records.
Take a photo of the wall, windows and doors in daylight. A colour chosen against them sits better than one picked from a sample alone.
Note anything close to the eaves, including neighbours' fences, planters and parked cars. It affects where ladders and materials go.
List any soffit or eavestrough that is also worn, so the estimate covers it and the colours match from end to end.
The price is set by the length and height of the roof edge, access on a tight lot, how much wood is rotted, the material and colour, and whether soffit or eavestrough work is added. The estimate is written and free.
Guelph homeowners ask about fascia
What does fascia replacement cost in Guelph?
It depends on the roof edge. Length, height, corners, access on a tight lot, how much wood is rotted and the material all count, and soffit or eavestrough work adds scope. We visit, measure and give a free written estimate with each item listed.
Does fascia work affect my stone or brick walls?
The fascia is a board at the rafter ends, above the wall. New fascia is fastened to the roof framing, not the stone. The estimate lists anything that has to be removed or refitted first, such as the eavestrough.
How much of a rotted fascia board has to come off?
Only the soft part, as long as the rest is sound. We cut back to firm wood, replace that length and join it neatly. If most of the run is soft, replacing the whole run is cleaner and stronger. The estimate says which applies.
What colours of aluminum fascia can I choose?
It comes in many colours, and we match them to your windows, eavestrough or siding. Bring a sample or a photo, and we suggest the nearest options. The colour you choose is written into the estimate before work starts.
Can soffit and fascia be replaced together in Guelph?
Yes, and it is common. They meet at the eave, and replacing both gives matching colours. Damaged soffit also lets animals reach the attic, while vented soffit keeps air moving, so the new panels keep their vents.











