Fascia repair and replacement in Hamilton
D&D Exterior Finishing replaces rotted fascia boards in Hamilton and wraps them in custom-bent or pre-formed aluminum, colour-matched to the soffit and gutters. We never wrap over soft wood. Fascia is often combined with soffit on the same visit, and every job starts with a free written estimate.
Fascia work in Hamilton includes cutting out rotted sections, replacing full boards on older homes, wrapping sound wood in aluminum, replacing torn or loose wrap and installing vinyl fascia where it suits. Since the fascia carries the gutters, we coordinate with the gutter crew so new troughs go onto solid boards.
Hamilton's older housing gives fascia a long, hard life. Neighbourhoods built in the city's growth from 1900 into the 1960s often still have original wood fascia, painted many times and sometimes never wrapped. Rot starts where gutters have overflowed or ice has sat against the board through the winter.
Fascia problems common in Hamilton
Original wood on older homes
Painted wood fascia on older lower-city homes often hides soft spots behind the paint. We probe the boards, replace what is rotted and cover the run in aluminum so it no longer needs painting.
Overflow and ice
Hamilton's changeable weather brings heavy rain, wet snow and freeze and thaw. When a gutter overflows or ice builds at the eaves, water soaks into the fascia joint. Fixing the board without fixing the overflow only buys time.
Hidden damage under old wrap
On homes that were wrapped years ago, loose or opened aluminum can trap water behind it. We pull back the wrap, check the wood and replace or re-wrap as needed.
Many older Hamilton homes are tall, with steep roofs and dormers, which puts the fascia high up and adds corners and returns. Staging and ladder setup are part of the job there, and fixing everything in one visit makes sense. Suburban homes in Stoney Creek, Ancaster and Glanbrook usually have longer, simpler eaves where wrap from earlier renovations is now loosening. We check those runs for soft wood behind the aluminum before re-wrapping, and we photograph any rot we find so you can see why a board is being replaced.
What sets the price in Hamilton
Fascia cost in Hamilton depends on roofline length, the amount of rotted wood, roof height and pitch, the aluminum profile and colour, and whether soffit or gutters are replaced together. Tall older homes may need staging. The free written estimate lists lengths and repairs. More on this: soffit and fascia cost guide.
Fascia repair questions from Hamilton homeowners
Can rotted fascia be repaired, or must it be replaced?
Small soft sections can be cut out and replaced. Long runs of rot are replaced as full boards. Either way, the new wood is wrapped in aluminum so it stays dry.
Why wrap fascia in aluminum?
Aluminum keeps water off the wood, does not need painting and can be colour-matched to your soffit and gutters.
Should I replace soffit at the same time?
Often yes, since the ladders and staging are already set up and the colours will match. If the soffit is sound, we leave it.
Who installs the new gutters?
Gutters are handled by D&D Home Services. We repair the fascia first and coordinate timing so the new gutters go onto sound wood.











