Interlock driveways, patios and walkways in Milton
D&D Exterior Finishing installs interlock driveways, patios, walkways and steps in Milton, using concrete pavers or natural stone. We excavate, lay geotextile where needed, compact the base in layers, set edge restraint and finish the joints with polymeric sand. Repairs lift and relay sunken pavers on a corrected base.
Interlock work in Milton covers new paver driveways and driveway borders, backyard patios, walkways to the side gate, front steps and landings, poolside areas and permeable paver areas where drainage needs help. We also repair sunken, heaved or weedy interlock by lifting the pavers, fixing the base and relaying them.
Interlock suits the way Milton grew. Thousands of homes were built in a short span after 2001, many with plain asphalt driveways and a small concrete pad out back. Owners are now replacing those with pavers that look better and can be repaired in sections.
Getting interlock right in Milton
A base deep enough for cars
Driveways carry far more weight than patios, so the granular base is typically 20 to 30 cm deep under a driveway, compacted in layers. Skimping here is why some driveways in town show ruts and sunken spots after a few winters.
Water on newer lots
Lots in newer subdivisions are often graded to drain toward swales and the street. A patio or walkway has to keep that drainage working and slope away from the house, so we check grades before setting the first paver.
Freeze, thaw and salt
Milton's long, cold winters move anything set on a weak base. Edge restraint keeps pavers from spreading, polymeric sand locks the joints against weeds and ants, and a properly compacted base keeps frost from heaving the surface.
In Milton's older streets around the downtown, front walks and steps are often original concrete that has heaved or cracked, and interlock is a common upgrade that can be lifted and relaid later if the ground moves. Newer homes usually start with a plain driveway, and adding interlock borders or a full paver driveway is a big change to the front of the house. For patios, many owners in town want a space that ties into a deck or hot tub, and we design the levels so steps and slopes work together.
What sets the price in Milton
Interlock cost in Milton depends on area, driveway or patio use, base depth, the paver or stone chosen, pattern and borders, steps or walls, removal of old asphalt or concrete and access for equipment. Repairs are priced by the area lifted and relaid. The free written estimate shows each item. More on this: interlock cost guide.
Interlock installation questions from Milton homeowners
How deep should the base be for an interlock driveway in Milton?
Typically about 20 to 30 cm of compacted granular base for a driveway, more than a patio or walkway needs. Soil and drainage on your lot can change that, and we explain the depth on the estimate.
Can you fix sunken interlock instead of replacing it?
Often, yes. We lift the affected pavers, correct the base and relay the same pavers, adding new ones only where pieces are broken.
What is polymeric sand and why does it matter?
It is a joint sand that hardens after it is wetted. It helps hold pavers in place and slows weeds and ant hills, which are common complaints with older interlock.
Do I need town approval to widen my driveway in Milton?
Widening a driveway or changing the curb cut can involve the Town of Milton. We note this on the estimate, and the municipality confirms what applies to your lot.











